Das-audio SX-218A Manuel d'utilisateur télécharger pdf (Page 14)

Pink Noise

Mains 230 Vrms

1/3 Potencia

SX-218A

Manual del Usuario / SX-218 / User’s Manual

Radiador

ON / OFF

A sound system should be switched on

sequentially. Switch on the self-powered units last

in your sound system (switch on the subwoofer

before the mid-high system). Switch on the sound

sources such as CD players or turntables, then the

mixer, then the processors, and finally the self-

powered unit. If you have several units, it is

recommended that you switch them on

sequentially one at a time.

Follow the inverse order when switching off,

turning self-powered units off before any other

element in the sound system.

Disconnect the device by removing the mains

connector from the mains socket. The mains

connector and mains socket must always be freely

accessible and never covered or blocked in any

way.

The models use a power cable equipped with

a Neutrik PowerCon NC3FCA connector. Power

can be daisy chained via the NC3FCB output

connector (see details on product label).

IMPORTANT: Do not disconnect the unit

while in use.

Ensure that the device is disconnected from

the mains by observing that the ON LED is turned

off. Please note that the ON LED can stay on for

several seconds after the mains power has been

disconnected.

Low mains voltage

Therefore the current consumed by a 115V

version is double the 230V version to achieve the

same acoustic power level.

If mains voltage falls below the shutdown

voltage for the unit, it will stop playing. When

acceptable levels are regained, the unit will switch

back on automatically.

Normally it is enough just to let the unit cool

down after you have corrected the problem so that

the system functions properly again.

Keep grilles clean and dust-free.

Air circulates from the bottom to the top of the

amplifier.

Overheating

This equipment does not normally overheat

during normal conditions of use. When overheating

occurs, the unit protects itself. You should then

find out why and if necessary contact an

authorised dealer for technical assistance.

Equalisation

The unit does not need extreme settings of

equalisation to produce quality sound. Avoid high

levels of gain on the equalisers. Gain values above

+3 dB on a console’s EQ are not recommended.

Overload indicator

This device has an indicator (LIMIT LED) that

lights when the signal is excessive.

The indicator should not be lit continuously.

This distorts the signal (quickly fatiguing your ears)

and may damage the speakers. Therefore, it is

recommended that you never work with this LED

on; at most it should blink only occasionally.

1 2 ... 9 10 11 12 13 14 15 16 17

Commentaires sur ces manuels

Pas de commentaire

Das-audio SX-218A Manuel d'utilisateur Page 14

Commentaires sur ces manuels

Produits connexes et manuels pour Audio Das-audio SX-218A