Das-audio Variant Series Systems Guide Manuel d'utilisateur télécharger pdf (Page 5)

Assembling a system with flown subwoofers

0º

5º

-5º

0º

VARIANT25

VAR IA N T 1 8

AX-V25

0º

5º

-5º

0º

VARIANT 25

VARIANT 18

AX-V25

To secure the enclosure to the grid (3) two

more safety pins are needed on each side. Check

that the position of the connecting links are as

shown in the image below.

If units are to be hung from the

subwoofers, first the connecting links

have to be rotated (7), then the safety pin must be

inserted into the hole that provides the desired

angle (8), and finally the connecting links have to

be introduced into the rigging hardware of the box

above and be secured by means of a safety pin on

each side (9).

variant 25A

variant 18A

The next step will be to hang one more

unit below the first one. To do so first both

connecting links will be rotated (4), then a safety

pin will be inserted into the hole labeled

(5) on the front side connecting link, and finally

both connecting links will be introduced into the

rigging hardware of the box above and secured by

means of two more safety pins (6).

variant

18A

variant 18A

The units feature integral rigging

hardware allowing them to be flown independently

or above enclosures.

The first step will be to mechanically connect

the first to the grid. 6 safety pins

are included in the rear side of the box in order to

do so. First rotate the rear side connecting links by

180º, and then the front side connecting links until

the labeled position has been

reached. After that, insert the pin through the hole

labelled (2).

variant 18A

variant 25A

variant 18A AX-V25

variant S uideystems G

1 2 3 4 5 6 7 8 9 10 ... 13 14

Commentaires sur ces manuels

Pas de commentaire

Das-audio Variant Series Systems Guide Manuel d'utilisateur Page 5

Commentaires sur ces manuels

Produits connexes et manuels pour Audio Das-audio Variant Series Systems Guide